|
1/43 & 1/32 Scale Super Tires |
||||
| Vanquish Series – Direct Fit Slip-on Silicone & Urethane (Yellow Dog) Super Tires (Final O.D. after mounted on the manufacturer’s stock wheel) |
||||
| Part # | Outer Diameter | Width | Make | Models/Applications |
| 1500 | 0.825″ 20.96mm | 0.510″ 12.95mm | Vanquish | Shadow, Lola, McLaren, M8E, Mirage, BRM |
| Monogram | Greenwood Corvette | |||
| RevoSlot Series – Direct Fit Slip-on Silicone & Urethane (Yellow Dog) Super Tires (Final O.D. after mounted on the manufacturer’s stock wheel) |
||||
| Part # | Outer Diameter | Width | Make | Models/Applications |
| 1501R | 0.415″ 10.54mm | 0.819″ 20.80mm | RevoSlot | Porsche 911 GT2 and Marcos |
| 1502R |
0.371″ 9.42mm | 0.829″ 21.06mm | RevoSlot | Viper, Supra, 2nd release Porsche 911 GT with wider rear wheel and Ferrari 333SP, Newly released Toyota GT ONE |
| SCX Series – Direct Fit Slip-on Silicone & Urethane (Yellow Dog) Super Tires (Final O.D. after mounted on the manufacturer’s stock wheel) |
||||
| Part # | Outer Diameter | Width | Make | Models/Applications |
| 1600 | 0.575″ 14.60mm | 0.250″ 6.35mm | SCX | 1/43 Scale NASCAR |
| 1601 | 0.818″ 20.78mm | 0.338″ 8.59mm | SCX | NASCAR (Pre-COT-COT Pro), Barracuda, Trans Am |
| Carrera | 1969 Camaro Drag Racer (not the street version) | |||
| Scalextric | Ford Falcon XB *NASCAR Monte Carlo, Ford Thunderbird, Ford Thunderbird Stock Car, IROC Z28 |
|||
| 1603 | 0.806″ 20.47mm | 0.373″ 9.47mm | SCX | 17mm Aluminum Pro-Wheel (Part #: 50460), Audi R8 Pro, Ferrari 550 Maranello, Ford Sierra RS Cosworth, Porsche 911 GT3 Cup |
| Avant Slot | 16.5x10mm Aluminum Wheel (Part #: 20712) | |||
Important Information
1. All part numbers highlighted in yellow are also made in Yellow Dog (Urethane) tires.
2. All part numbers with “R” following the number, means that specific tire has one rounded sidewall only.
3 . Widths for “R” series tires are for the contact patch only (excludes sidewall).
4. Tires 1007R, 1008R, 1009R and 1302R have a minor arc radius on one side. (for tight wheel well clearance)
5. Manufacturers trade names are property of the respective companies & used for identification only.
6. Models/Applications noted in blue, while not specifically designed for the application, have been tested and can be used for the model specified.